Folkes Home Services, Cooling & Burner Service is proud to offer the residents of Clinton Corners, NY professional heating and cooling services. Our licensed technicians are dedicated to providing you with 5 star service, every time.
Read our reviews below to see how your neighbors in Clinton Corners, NY give us 5 star service ratings. Call us at (845) 200-3169 to schedule!
Local Reviews
for Clinton Corners, NY
Powered by Nearby NowOur Reviews by City
Great Service, Very Professional
Carl - Clinton Corners, NY
Great service
Greg - Clinton Corners, NY
No issues with tech. Friendly and answered all my questions. Replacement parts seemed a little high for such a small part (contact switch). It is what it is. Your team is still great!
Vincent
Vincent - Clinton Corners, NY
Good service
Heating Service
Craig - Clinton Corners, NY
Excellent job
Cleaning of furnace
Greg - Clinton Corners, NY
Scott was thorough and efficient
Danny was the best
Greg - Clinton Corners, NY
Danny was very talented, very thoughtful, very considerate, and funny. He answered all my questions with a smile. He tolerated me watching him and learning from him.
Love Greg and folkes
Brian - Clinton Corners, NY
Helpful service
Peter - Clinton Corners, NY
Tony was great- very knowledgeable and steered us in a good way.
HUAC’s tune up
Vincent - Clinton Corners, NY
Great service
Awesome
Craig - Clinton Corners, NY
Danny is always professional, courteous and knowledgeable. Great experience!
Really good service. Great guys who fixed the issue well and quickly.
Peter - Clinton Corners, NY
Chris H.
Customer has a plugged boiler, pulled stack off and boiler completely packed. Customer needs to get in contact with his landlord first before any repairs can be made gave customer estimate and pricing to do repairs on boiler. Boiler is 34 years old replacement of boiler should be in the near future.
Margaret M.
Performed annual AC tuneup on a mini split system with three heads. Unit was a little low on refrigerant. Recharge system with R410A refrigerant, also added UV dye to diagnose leak on a later date. Tested units. System operational.
Margaret M.
Service for plumbing installed: arrived to home to go into basement to shut off water. Went outside and fixed broken line near pool equipment.I then went back downstairs and Removed 1 1/2 hp deluxe control box and pump saver from plywood board. Removed wiring and installed new 1as15 control box to wall wired in direct power and power going to pump. Install transducer and calibrated pressure. Cut into main line and ran new 3/4 pex line to existing irrigation line on other side off basement with proper shut offs. Went outside and removed hosebib and cut open hole in wall to access piping. Found that we needed a 6 inch frost free valve that we didn’t have. Explained to customer how we would need to return customer is satisfied with service all working properly at this time.
Scott Y.
Ac tune up x3. Cleared all drain lines. Replaced all filters with customer supplied filters. Tested all blower motors and capacitors. Took delta t readings, all units are between 16-18 degree split. Pressures for all 3 units are good, superheat is in the low 20’s for all 3. Capacitors all tested normal and no signs of pitted or burnt capacitors. All 3 systems take r22, customer purchased cans of Freon if systems ever needed to be charged. All systems running.
Margaret M.
Service for leaking outside hosebib. Arrived to home to find that valve was leaking when it was turned on. Explained to customer who I would replace unit. Customer also showed me that the had leak in irrigation line. Went out to line and found that the pvc had cracked and was In need of replacement. Went inside with customer and found where the line came out of home found that this line was after treatment causing unnecessary ware on softener. Went over to well tank and found that customer had old Antiquated system that kicked on at 40 and shut off at 60 psi. Explained to customer how with this system there is pressure fluctuations. Explained how customer could get better pressure and performance if a constant pressure system was installed. Wrote up all estimates and customer went ahead with service we will return to complete sold work. Customer is satisfied with service.
Greg M.
Completed installation of WiFi thermostats for living room and bonus room. Tested heating and cooling operation. Replaced filter drier and repaired refrigerant leak for second floor condenser. Pressure tested, evacuated and recharged system. Completed annual maintenance on on three ac systems and replaced filters.
Margaret M.
Performed annual AC tuneup on 4 systems. Second-floor hallway unit was low on refrigerant. Charged system with R22 refrigerant. First floor main 4 ton unit was also low on R410A refrigerant. Charged unit with refrigerant, tested units. Systems operational.
Margaret M.
Performed annual AC tuneup on two systems. Second floor unit was low on R22 refrigerant. Unit had 14° split at handler supply and return. Charged unit with refrigerant. System temperature split improved to 20° split. Tested units. Systems operational. Recommend duct cleaning’s, on both units.
Danny B.
No AC 1st Floor due to bad crank shaft heater, causing breaker to trip, removed from sequence so i can operate system, needs to be replaced, also found system low on R-410a, leak search needs to be done, in order to evaluate proper repair for system, also found 1st Floor system that cools other side of home with frozen coil, system needs to be shut down and thawed out to properly assess next course of action.
Noah D.
Replaced the condenser fan motor, when I went to tested the operation found the motor not starting now. I had 91v coming from the breaker in the sub panel. Replaced the breaker with the correct size and brand breaker. When I turned in the breaker a spark and a seizing sound came from the main panel. Took a video of the issue. Brought the new home owner down to see what was going on. They will need an electrician to resolve the issue from here. The motor is replaced and the condenser should be operational once the electrical issue is fixed.
Chris H.
Customer stated warm air blowing through vents and compressor not on, system had 5 yellow flash code for compressor open, customer did have some mice in unit but inspected all wires nothing chewed, tested windings of compressor which all tested fine, reset unit and flipped breaker on system ran for about 30 seconds and fan barely spinning and motor smells burnt, system has new capacitor and hard start kit, found motor to be bad will need pricing and availability for new condenser fan motor will need to follow up with customer.
Margaret M.
Found the indoor part of the second-floor master bedroom unit To be working fine indoors, Put my attention outside where I found a weak capacitor. Replaced capacitor. Tested unit, took supply and return temperatures in attic had a 18° split at supply and return. System operational.
Greg M.
Checked over operation of heat and ac. Certain vents through home either have been closed or disconnected. Ductwork not seized to modern manufacturing sizing. Very low air velocity. Checked air filter. Recommended to have ductwork in home renovated with zoning. Air conditioning refrigerant type MO99 (R438A).
Greg M.
Completed running new 6 wire circuit to second for thermostat. Wired to air handler. Installed Honeywell WiFi thermostat and checked operation. Performed leak search and found leak at filter,drier. Needs,to be repaired. See follow up for for further work that needs to be completed.
Scott Y.
Ac tune up. Checked pressures, blower motor, cleared trap, checked filters, took temperatures. Replaced outdoor capacitor and contactor. System running normally.
Greg M.
Second floor thermostat indicating no C wire. C wire at thermostat was wired to G in air handler. Switch wire to C in air handler. Fault on thermostat won’t clear. Wired temporary basic thermostat so customer can have cooling. Customer would still like WiFi thermostat. Would need to run 6 wire for dedicated C wire. Started system and found low on charge. Need to leak search system when we return. Installed last year. Charged system for cooling.
Margaret M.
Performed annual AC tuneup on 2 units. Tested units. Systems operational.
Greg M.
Customer stated strong smell of gas from furnace. Checked for gas leaks, took combustion test and ran system for,20 minutes. System running normally, no gas leaks found or fault codes in furnace. Noticed strong smell of gasoline in garage where furnace is. Found portable generator leaking gas onto floor. Need to call to schedule ac maintenance.
Greg M.
Completed annual maintenance on on two heat pump system. Cycled systems and checked operation.
Greg M.
Completed annual maintenance on oil boiler.
Noah D.
Arrived and looked at the thermostat. It is on. Found it’s not connected to the WiFi. Called the customer and could not get the password into the thermostat since it said the battery was low. All the wiring was connected correctly at the thermostat and it was reading power to common. Took pictures and sent it to the customer. He will be calling next about this thermostat since he had issues in the past with it.
Noah D.
Cleaned and serviced oil furnace.
Scott Y.
Customer is not home. Spoke with him on phone. He attempted to install new nest thermostat and it would not heat edition above garage. Wired thermostat with blue to common, red to rh, yellow to y and thermostat fired up boiler and began heating first company pipes, checked temperatures from vents in edition and temperatures were good. Allowed thermostat to reach temperature and unit turned off normally. System is operating normally. Per dj, diagnostic only. Customer was not home and on a conference call and will have to call office for payment.
Noah D.
Cleaned and serviced 2 heat pump systems. Replaced the filters and took pressures. Coils were cleaned and all components were checked.
Scott Y.
C/S Oil. Replaced filter strainer and nozzle. Brushed and vacuumed flue and chamber. Checked all components. Boiler is under 2 years old and is rarely used. All components burner and piping are all in great shape. System is running normally. Customer declined MA for Oil.
