Millbrook, NY Heating and Cooling

Home / Millbrook, NY Heating and Cooling

Need professional heating and cooling services in Millbrook, NY? Look no further! Folkes Home Services, Cooling & Burner Service provides expert services from highly trained technicians. We work for your comfort and satisfaction.

Check out our customer reviews below to see examples of our high quality work. Choose Folkes as your HVAC specialist in Millbrook, NY.

Local Reviews
for Millbrook, NY

Folkes Home Services Rated 4.9 out of 5 stars based on 19 customer reviews

Map of Millbrook, NY

Great job




Review of Folkes Home Services


Map of Millbrook, NY

Excellent service




Review of Folkes Home Services


Map of Millbrook, NY

Reliable service




Review of Folkes Home Services

Noah did a great job.


Map of Millbrook, NY

Ready for summer




Review of Folkes Home Services

On time, knowledgeable, listened, and did what he needed to do in a timely fashion.


Map of Millbrook, NY

extra care from the technician after the disappointment of the failure of the new furnace.




Review of Folkes Home Services


Map of Millbrook, NY

problems with the furnace were not his fault, but disappoint6ing results with the furnace.




Review of Folkes Home Services


Map of Millbrook, NY

Greg and his associate were awesome!!!!




Review of Folkes Home Services

Your business and staff are second to none. Thank you!!!!


Map of Millbrook, NY

very good




Review of Folkes Home Services


Map of Millbrook, NY

always helpful




Review of Folkes Home Services


Map of Millbrook, NY

an emergency well handled by Dan




Review of Folkes Home Services


very nice service with Chris on an emergency call on a Saturday within one hour of my calling for help.




Review of Folkes Home Services

great service and care for the customer with a smile.


Great Service!!!




Review of Folkes Home Services

Folkes just recently replace my older Freon heat pump to the system that is now required. I can not say enough about the quality of their work, and also the staff that I worked with. Linda, Jarrett, Diego, and Tyler went above and beyond to get my system installed promptly when I really needed it. Thank you all for you professional customer service. Danny Ryan


Great




Review of Folkes Home Services

Thank you all perfect, Greg was very thorough


very friendly and professional guys, well done job




Review of Folkes Home Services


He was great




Review of Folkes Home Services


Great service, price was a bit high




Review of Folkes Home Services


The Best Service




Review of Folkes Home Services

Friendly, work was very clean, explained all repairs.


Professional and efficient




Review of Folkes Home Services

Service was scheduled to suit my needs. Service was performed in a timely manner. The serviceman answered the few questions I had to my satisfaction. Left the area clean.


friendly and informative




Review of Folkes Home Services


Response from Folkes Home Services:

Thank you for the 5 Star Review!


Margaret M.

Margaret M.

Kitchen sink- Hardness 1 Ph 8 TDS 197 Iron 0 Folks arrived on 07/28/2021 for a water quality test. I tested the water from the kitchen sink and wrote down the results. As of right now the softener is working like it is supposed to. Custer was unsure of the age of the existing equipment. I let the customer know that the units last between 10-15 years depending on the quality of water and if they were maintained. I left a few estimates to replace the current unit as well as replace some of the other equipment in the home. I then thanked the customer for choosing folks and left.

Near Milewood Rd, Millbrook, NY 12545
Margaret M.

Margaret M.

Folks arrived on 07/26/2021 to check water pressure. Upon arrival I went down to the well tank and looked over the system everything was on the newer side. I asked the customer how old the well pump was he stated it was approximately 8-10 years old. I also asked him about the filter, he said it was changed about a month and a half ago, he changed the filter and it was clogged he replaced and it helped with the pressure. I recommended to install a constant pressure system due to the size of the building it is a restaurant and an apartment. I emailed estimate to replace well and constant pressure system. I thanked the customer for choosing folks and left.

Near US-44, Millbrook, NY 12545
Tony P.

Tony P.

Replaced customer supplied 30 am fuses for fusible disconnect for condenser. The fuses tripped immediately. Found compressor grounded. Need to replace system.

Near Milewood Rd, Millbrook, NY 12545
Noah  D.

Noah D.

The domestic water line to the backflow preventer was disconnected. Used 6 inches of new copper to solder to the backflow preventer and tested the system no other issues and no leaks.

Near Shunpike, Millbrook, NY 12545
Margaret M.

Margaret M.

Arrived to home to reconnect well tank. Found pump to run but not build proper pressure ran water and found well to loose pressure and drop in amps. Explained to customer how she is running out of water customer stated she just had pump installed recently and she is going to call to get pump set deeper for free.

Near Halcyon Rd, Millbrook, NY 12545
Danny B.

Danny B.

No AC on parts of 2nd floor, due to bad fuse at disconnect box for condenser, needs to be replaced, customer is going to replace fuses herself, recommend replacing disconnect. Water leak in basement due to condensate pump overflowing found tripped GFI, reset, tested, pump working fine, could not go into attic, found wasp nest and wasps buzzing around everywhere.

Near Milewood Rd, Millbrook, NY 12545
Margaret M.

Margaret M.

Service to: diagnostic plumbing. Arrived to customers home and found that they had no water to home. I diagnosed well system and found that after a short run water system runs out of water. I recommended to customer about pulling out well pump and further diagnosing issue. Customer will call us if they would like us to further diagnose issue. I then cleaned up my work area, collected payment, thanked customer for work and left.

Near Halcyon Rd, Millbrook, NY 12545
Greg M.

Greg M.

Found phase monitor locked out on front phase loss again. Loss of power during storm. Checked incoming power to disconnect. Line 1=112v, line 2=188v, line 3=114v. Customer still has problems with main electrical service to build. Recommended to have Central Hudson correct electrical service. System is locking out on phase monitor every time there is a storm. Also checked unit for front restaurant cooling ok at this time.

Near US-44, Millbrook, NY 12545
Greg M.

Greg M.

Completed replacement of outdoor fan motor. Completed wiring of outdoor fan motor. Started up system to check operations. Ok. Checked indoor air handler. Checked pressure readings and supply and return temperatures. Juan I’ll drop check off for previous balance of $1656.75, and for today’s work $4826.70 for a total of $6483.45.

Near Arcadia Dr, Millbrook, NY 12545
Margaret M.

Margaret M.

Performed annual AC tuneup. Found some of the insulation on the ductwork becoming undone, most likely as a result of condensation. Retapped insulation. Unit had 20° split at supply and return. Tested unit. System operational.

Near Alden Terrace, Millbrook, NY 12545
Greg M.

Greg M.

Found no power to first floor condenser. Found breaker to be tripped. Found that compressor terminals blown out and system lost all refrigerant. 20+ year old R22 system. Need to follow up with to set estimate for first floor ac replacement.

Near Ciferri Dr, Millbrook, NY 12545
Greg M.

Greg M.

Replaced EMC blower motor for kitchen air handler and checked system operation. Customer not home. Need to bill for repairs.

Near Arcadia Dr, Millbrook, NY 12545
Noah  D.

Noah D.

Arrived and found the kitchen system frozen solid. Left the switch off to the unit. We will need to come back to,Oreos in the afternoon to diagnose the issue.

Near Arcadia Dr, Millbrook, NY 12545
Margaret M.

Margaret M.

Drain line in dining room head unit was clogged. Cleared drain line with two CO2 cartridges. Ran a few ounces of evaporator coil cleaner through drain, and then flushed with at least 10 pints of water. Unit had a 19° split. Tested unit. System operational.

Near Sutton Rd, Millbrook, NY 12545
Noah  D.

Noah D.

Arrived and the customer stated a leak going down the wall. Found in the line hide that mice chewed through the condensate line. Made a repair to the condensate line and reconnected it to the existing piece. Also cleared the condensate line. Tested after making the repair.

Near Killearn Rd, Millbrook, NY 12545
Greg M.

Greg M.

Completed installation and wiring for line voltage phase monitor. Adjusted control settings and checked system operation.

Near US-44, Millbrook, NY 12545
Greg M.

Greg M.

Found system locked out on high pressure lockout. Condenser fan motor needs to be replaced. Follow up pricing and availability.

Near Arcadia Dr, Millbrook, NY 12545
Scott Y.

Scott Y.

Ac tune up. Replaced filters. Cleared drain lines. Took delta Ts, tested pressures. Tested all components. Both systems operating. Recommend duct cleanings after customers renovations are complete, filters were very plugged up from construction.

Near Shunpike, Millbrook, NY 12545
Greg M.

Greg M.

Found system locked out on high pressure trip. Reset system and checked running pressures, condenser coil and condenser fan. System is running and cooling normally at this time.

Near Arcadia Dr, Millbrook, NY 12545
Margaret M.

Margaret M.

arrived at customers property to install a new thermal tank for dishwasher. Old thermal tank might have been damaged when booster for hot water had a surge. I cut old supply line and drained out old thermal tank. I then proceeded to remove old tank and set new tank in place connected supply line and ran dishwasher through cycles to ensure that the proper pressure and hot water was being produced. Everything was in working order on departure.

Near US-44, Millbrook, NY 12545
Margaret M.

Margaret M.

Arrived at customers property to give estimate to replace a thermal expansion tank for a commercial dishwasher.

Near US-44, Millbrook, NY 12545
Danny B.

Danny B.

Found clogged filter which was causing coil to freeze up, replaced. Checked condensate pump, drain line, delta t, system operational.

Near Shunpike, Millbrook, NY 12545
Greg M.

Greg M.

Found wire for inducer motor had become disconnected from control board. Reconnect wire and checked heat and cool operation.

Near US-44, Millbrook, NY 12545
Greg M.

Greg M.

Completed replacement of blower motor for commercial package unit. Adjusted pulley and belt. Tested operation. Checked amp draw 3.6, with range of manufacturers specs.. Need to look into phase protector as that have many electrical problems to building.

Near US-44, Millbrook, NY 12545
Noah  D.

Noah D.

Arrived and the customer stated the bedroom zone wasn’t working. The thermostat was set for 70 and it was at the set temperature. Turned that zone on and checked pressures and temperatures. No issues with the unit. Recommended maintenance on all the systems. The filters were also very dirty. Need to be replaced. Took the filters out and air was moving much better.

Near Milewood Rd, Millbrook, NY 12545

For Money Savings Coupons

Better Business Bureau
X