Call Folkes Home Services, Cooling & Burner Service at (845) 896-HEAT (4328) for all of your home’s heating and cooling needs in Pawling, NY. You can rely on Folkes for fast and accurate work performed by experienced HVAC professionals.
Read the reviews below to see why our customers are continually satisfied with our work in Pawling, NY.
Local Reviews
for Pawling, NY
Powered by Nearby NowOur Reviews by City
Wonderful service
Lonna - Pawling, NY
Courteous and knowledgeable very pleased with the overall service from booking the appointment arrival time and date and technician.
Great service! Easy to understand explanations.
Pamela - Pawling, NY
A/C device by Chris
Rick - Pawling, NY
Nice job. Very conscientious technician.
Excellent Service - love Folkes!
Kim - Pawling, NY
Highly recommend their service plan
Great Service
Liam - Pawling, NY
Chris was a very nice guy and took the time to explain to me exactly what the problem was.
Great
David - Pawling, NY
Very good work and very good on the service personnel
Response from Folkes Heating, Cooling and Burner Service:
Thank you for the five star review. We were happy to have provided service to you.
Professional Service
Rusty - Pawling, NY
Kurt was great. Very professional.
Response from Folkes Heating, Cooling and Burner Service:
We appreciate the review. Thank you.
Great
Jeremiah - Pawling, NY
Excellent service
Great service
Jeremiah - Pawling, NY
Excellent
Scott Y.
Ac tune up. Checked pressures, contactor, capacitor, blower motor, coil, drain line. Took temperatures. System is running normally. Went over residential replacement with customer, r22 system around 20 years old, customer just replaced 2 units through us at another location and would like to hold off on replacement at this location.
Margaret M.
Cleaned and serviced two AC systems. Tested both units. Systems operational
Greg M.
Found boiler pressure exceeding 40psi when system is running causing relief valve to open. Over pressurizing caused by failed expansion tank. Replaced expansion, relief valve, filled and purged boiler. Checked system operation. Running pressures and temperatures are normal.
Greg M.
Went over boiler settings again with manufacturer. Co2 11.8%, co 47ppm, o2 4.9%, pump pressure 140, smoke 0, draft in flue -.1. Manufacturer seems to believe that boiler is oversized for application causing burner short cycling so not enough heat to create proper draft within passages in boiler. Recommended system replacement.
Margaret M.
Cleaned and serviced oil boiler. Brushed and vacuumed heat exchanger. Checked 3 circulater pumps, expansion tank, water feeder, and relief valve. Replaced oil filter, pump strainer, and burner nozzle. Performed combustion and efficiency, and smoke test. Tested unit. System operational.
Greg M.
Found boiler plugged with soot. Performed heavy cleaning on boiler. Took combustion, efficiency, smoke and oil pump pressure tests. All readings are normal. Recommended system replacement due to age and history of sooting. Need to follow up with replacement estimate.
Danny B.
Cycled system on and off, system fired up with no issues, checked electrical, checked power venter, found no issues to report
tonyp@folkeshomeservices.com
Completed annual clean and service of one oil fired furnace. Replaced filter strainer and nozzle. Performed combustion analysis and smoke test. Checked all components. Found crack in combustion chamber. It’s hard to tell if crack is all the way through with no access to back end of furnace. Furnace is almost 30 years old and customer wants estimate for replacement.
Scott Y.
C/S Gas. Cleaned burners, checked ,inducer, capacitor, boiler control, all 3 switching relays, circulators. Found pressure of boiler at 28 at arrival, found bad expansion tank. Recommended replacing air vent and expansion tank. Upon attempting to remove expansion tank, tank snapped from screw on fitting, fitting stuck in air scoop and will not come out, attempted with torch, pipe wrench. Also had to replace air scoop after multiple attempts to remove fitting from bottom of air scoop. Tested system after repairs and system operating normally.
Scott Y.
C/S Oil for new install. Replaced filter s trainer and nozzle. Vacuumed furnace. Checked primary, oil pump, igniter, electrodes, temp rise. Smoke and combustion test with pictures of both results. System running normally.
Greg M.
Found system locked out. Could not find error code in manufacturers database. Reset system and checked refrigerant pressures, filters, and temperatures. System operating normally at this time. Customer had lost power which may have caused communication error. If problem persists will need to return and call manufacturer.
Danny B.
Replaced bad aquastat under warranty. Originally replaced 11/2019.
Noah D.
Cleaned and serviced oil boiler, checked all components, changed the filter, strainer and nozzle. Took combustion test. No issues to report.
Greg M.
Customer had power surge to home. Damaged furnace controls. Need to order and replace high limit and fan cycle control. Also high voltage has been wired incorrectly. Need to correct wiring to manufacturers specifications. No heat on first floor.
Tyler F.
Arrived to find clogged laundry drain. Rescheduled for Friday to snake and camera line.
Margaret M.
Removed old 80 gallon electric water heater and replaced it with new 50 gallon electric American ProLine commercial grade water heater. Ran startup operations and ensured customer had hot water before departure Serial number: 2039121146665 Model Number: E6N-50H 120
Chris H.
Cleaned and serviced one oil boiler with MA. Replaced air vent and temperature boiler gauge, changed filter nozzle and strainer, brushed burner chamber, took combustion and efficiency test which everything looked good. Also replaced thermostat in apartment over garage for customers tenant.
Tyler F.
Arrived at customers home for a estimate on a new hot water heater. Found the a 80 gallon electric. Advised customer they are no longer being made. Customer asked about pairing two 50s together which would work but additional electrical line would need to be run from panel. Also gave customer estimate on a 80 gallon heat pump hot water heater. 2 year Folkes labor warranty
Greg M.
Completed replacement of zoning control panel. Also replaced heating relay for upstairs air handler. Checked operation of all heat zones and hot water.
Greg M.
Found multiple heating zones an hot water zone calling for heat. Found electrical fault in zoning control panel. Was able to move around relays n panel to get heat and hot water working intermittently. Need to return replace 6 zone circulator relay with priority control.
Greg M.
Found oil burner locked out on primary control. Motor not spinning. Found mouse caught in squirrel cage. Removed and started burner and checked operation. Customer renewed maintenance agreement. Need to call and schedule maintenance. Recommended to replace air vent and pressure relief valve.
Greg M.
Completed annual maintenance on oil boiler and tested system operation. Also looked into why heat pump locks out on high pressure switch every winter. Found refrigerant pressures exceeding 600Psi after 30 seconds. Recommended to replace out TXV. Need to follow up with pricing on TXV and ERV installation.
Greg M.
Completed installation of mechanical make up air ventilator. Checked operation. Also sealed most of return panning behind indirect, what was accessible.
Greg M.
Found discharge line for basement condensate pump. Remade connection and tested with water. Boiler is still sooting. Checked nozzle size, draft, combustion test, pump pressure, draw assembly depth and for afterburn. Need to return to finish fresh air boot. Took info for ordering.
Margaret M.
Installed first company air handler with Amana condenser, 20x20 Honeywell media filter, ran wire for condenser 2 staging. ( basement system) installed dehumidifier ducted to basement system, ran fresh air pipe above boiler.
